3D PrintPRO 2
Compact system for 3D printers. Unit only, no hose kit.
- Airflow
- 27 cfm
- Pressure
- 9 mbar
- Inlet
- 2.0 in
- 50 mm
- Power
- 115 V
$801.80
Donaldson BOFA · 3D printing
3D printing fume extractors
Extractors for 3D printing, from a single benchtop unit to an enclosure package. Each filters emissions through HEPA and activated carbon.
- 6 systems on 4 extractor models
- 27 to 223 cfm
- 115 V
How to choose
Choose a 3D printing extractor
-
Count the printers and check the enclosure.
An open-frame printer can go in the Shield enclosure with a 3D PrintPRO 3.
-
Match airflow to the printer.
27 cfm (3D PrintPRO 2), 70 cfm (3D PrintPRO 3), or up to 159 cfm, adjustable (3D PrintPRO 4).
-
Check the filters.
Every unit filters through HEPA (99.995% at 0.3 µm) and activated carbon.
-
Check noise and space.
The units run from under 44 dB(A) (3D PrintPRO 2) to under 75 dB(A) (3D PrintPRO 4).
Narrowed it down? The table below puts airflow, pressure, inlet, power and filters side by side. All 6 systems in one table
Benchtop
50 mm inlet, 27 to 70 cfm
3 systems
Hose kit included
3D PrintPRO 2 with hose kit
Adds a bench hose kit: stay-put arm, funnel, hose and table bracket.
- Airflow
- 27 cfm
- Pressure
- 9 mbar
- Inlet
- 2.0 in
- 50 mm
- Power
- 115 V
$1,029.80
3D PrintPRO 3
For 3D printers, with digital speed control and return airflow.
- Airflow
- 70 cfm
- Pressure
- 20 mbar
- Inlet
- 2.0 in
- 50 mm
- Power
- 115 V
$1,383.20
Enclosure package
Enclosure for open-frame printers
1 system
Package
Shield + 3D PrintPRO 3 package
Enclosure for open-frame printers, packaged with a 3D PrintPRO 3.
- Enclosure
- 36.2 × 24.2 × 24.7 in
- H × W × D, enclosure only
- Extractor
- 3D PrintPRO 3
- Power
- 115 V
$2,109.95
Higher airflow
Up to 223 cfm
2 systems
3D PrintPRO 4
For 3D-printing emissions, with adjustable airflow.
- Airflow
- 30–159 cfm
- min to max
- Pressure
- 100 mbar
- Inlet
- 75 mm
- Power
- 115 V
$3,910.20
PrintPRO Universal
Compact system for printing applications, with three inlet sizes.
- Airflow
- 223 cfm
- Pressure
- 96 mbar
- Inlets
- 3 sizes
- 1.3, 1.5 or 3.9 in
- Power
- 115 V
$3,441.85
Compare
All 6 3D printing systems side by side
Airflow, pressure, inlet, power and the filters each unit takes. Part numbers link to the filter pages.
| Extractor | Airflow | Pressure | Inlet | Power | Pre-filter | Main filter | Noise |
|---|---|---|---|---|---|---|---|
| 3D PrintPRO 2 | 27 cfm | 9 mbar | 2.0 in · 50 mm | 115 V | 1UA1030102Pad, 96% at 2 µm, pack of 5 | 1UA1030099HEPA 99.995% at 0.3 µm, 3.0 L carbon | < 44 dB(A) |
| 3D PrintPRO 2 with hose kit | 27 cfm | 9 mbar | 2.0 in · 50 mm | 115 V | 1UA1030102Pad, 96% at 2 µm, pack of 5 | 1UA1030099HEPA 99.995% at 0.3 µm, 3.0 L carbon | < 44 dB(A) |
| 3D PrintPRO 3 | 70 cfm | 20 mbar | 2.0 in · 50 mm | 115 V | 1UA1030102Pad, 96% at 2 µm, pack of 5 | 1UA1030099HEPA 99.995% at 0.3 µm, 3.0 L carbon | < 57 dB(A) |
| Shield + 3D PrintPRO 3 package | 70 cfm | 20 mbar | 2.0 in · 50 mm | 115 V | 1UA1030102Pad, 96% at 2 µm, pack of 5 | 1UA1030099HEPA 99.995% at 0.3 µm, 3.0 L carbon | < 57 dB(A) |
| 3D PrintPRO 4 | 30–159 cfm, minimum to maximum | 100 mbar | 75 mm | 115 V | Not applicable | 1UA1030469Combined HEPA 99.995% at 0.3 µm and carbon | < 75 dB(A) |
| PrintPRO Universal | 223 cfm | 96 mbar | 1.3, 1.5 or 3.9 in | 115 V | Not applicable | 1UA1030157HEPA 99.995% at 0.3 µm, 31.2 L carbon | < 68 dB(A) |
The 3D PrintPRO 2 with hose kit and the Shield package use the same extractors as the 3D PrintPRO 2 and the 3D PrintPRO 3.
Filters and accessories
Filters and accessories for 3D printing extractors
Replacement filters
HEPA and carbon filters and pre-filters for every unit on this page. Pick your model to see its set.
Find filters for your modelArms, hoods and accessories
Extraction arms, hoods and accessories for BOFA extractors.
Shop accessoriesAccessories for these units
-
BOFA PrintPRO Silencer Stand with Air Return Spigot (75mm)1UA1060052
Fits 3D PrintPRO 4
$894.90 Donaldson list $942.00
Which unit fits my printer?
Tell us the printer model, how many you run and the materials you print. We’ll recommend a unit and, for an open-frame printer, whether the Shield package fits.
What does the 3D PrintPRO 2 hose kit add?
A bench hose kit: a stay-put arm, a funnel, hose and a table bracket.
What do the filters do?
Each unit filters emissions through HEPA (99.995% at 0.3 µm) and activated carbon. The part numbers are in the table above, and the filter finder lists them by model.
Can I finance an extractor?
Yes. We work with several equipment-financing partners. See our equipment financing options for details and to get started.
Can I order with a purchase order?
Yes. Schools, labs, government buyers and companies can order on a purchase order. See quotes and purchase orders for how it works.
Extraction advice
Not sure which extractor fits?
Tell us about your printers, materials and space. We’ll recommend an extractor and any enclosure to go with it.
Already own a BOFA extractor? Find replacement filters