Flow-through cutting table for Universal Laser systems.

Models: VLS3.60, VLS3.75, PLS3.75, VLS4.60, VLS4.75, VLS6.60, VLS6.75, PLS4.75, PLS6.75, PLS6.150, ILS9.75, ILS9.150D, ILS12.75, ILS12.150D, MVX Series

Image for illustration purposes only

ULS Flow-Through Cutting Table

The Flow-through Cutting Table consists of a thin-wall aluminum honeycomb-core evenly supported by an underlying hollow structure. The target material is placed on the honeycomb core. When excess laser power passes the lower surface of the target material during a laser cutting process, this excess power is passed into the supporting structure where it is absorbed in an unfocused state. Where the excess power passes over the honeycomb core edges, a minimal amount of laser power will be reflected onto the bottom edge of the target material, which may manifest as a small periodic mark on the bottom of the laser cut edge.

Cutting tables are made to order. Usually ship in 3-7 business days.

Please contact us if you are unsure which cutting table is the correct size for your machine.