Explore BOFA systems for fume and dust extraction. Browse by application and compare up to three models side by side. Need help choosing? Tell us about your process.
Search by model to find compatible replacement filters, including options for older systems.
No BOFA model matches "".
Check the model plate on the unit, or send us the model and serial number.
Help finding a filterLaser cutting and engraving · 16
Extractors for laser cutting, engraving and marking, from compact units to high-airflow systems, plus a filtered cooling unit.From compact units to high-airflow systems, plus a filtered cooling unit.
How to choose
Narrowed it down? Tick Compare on up to three to see filters, controls and power side by side.
All 15 laser extractors in one tablePairing with a Universal laser? Tell us the model and we'll match the extractor.
Smaller cabinets for single lasersSmaller cabinets
Compact, for light-duty laser use. Standard option has a hose kit.
Light-duty laser · hose kit option
106 cfm · 2.0 in inlet · 115 V
From $1,630.20
2 options
Donaldson list $1,716.00
Cost-effective system for light to medium-duty applications.
Light to medium-duty
Specs not verified yet
We're checking this model's figures against the Donaldson datasheet. Until then, use the spec sheet.
$4,476.40
Donaldson list $4,712.00
Light-duty laser use. Options add a VOC sensor and remote signals.
Light-duty laser · VOC sensor option
206 cfm · 3.9 in inlet · 115 V
From $2,537.45
4 options
Donaldson list $2,671.00
75 mm inlet, about 220–240 cfm75 mm inlet
Mid-sized, for a range of laser uses. iQ display with live airflow.
Mid-sized · iQ display
241 cfm unrestricted · 2.9 in · 115 V
From $4,126.80
3 options
Donaldson list $4,344.00
Mid-sized, for lighter-use laser applications. iQ display.
Lighter-use laser · iQ display
223 cfm · 2.9 in inlet · 115 V
From $3,343.05
4 options
Donaldson list $3,519.00
Mid-sized. Color touchscreen, data stream and Ethernet port.
Mid-sized · touchscreen, Ethernet
241 cfm unrestricted · 2.95 in · 115 V
From $3,866.50
5 options
Donaldson list $4,070.00
Ride-on base unit, with high airflow and pressure.
Ride-on base · laser engraving
224 cfm · 2.9 in inlet · 115 V
$3,563.45
Donaldson list $3,751.00
Ride-on base unit with a large platform, for laser engraving.
Ride-on base · large platform
223 cfm · 2.9 in inlet · 115 V
$4,394.70
Donaldson list $4,626.00
125 mm inlet, 324 to 1,470 cfm125 mm inlet
Medium-duty laser applications. iQ display and filter monitoring.
Medium-duty laser · iQ display
324 cfm · 4.92 in inlet · 115 V
$6,610.10
Donaldson list $6,958.00
Medium to heavy-duty laser applications. iQ display.
Medium to heavy-duty · iQ display
515 cfm unrestricted · 4.92 in · 115 V
$7,884.05
Donaldson list $8,299.00
Medium to heavy-duty. Color touchscreen with filter-life monitor.
Medium to heavy-duty · touchscreen
515 cfm unrestricted · 4.92 in · 115 V
From $6,859.00
2 options
Donaldson list $7,220.00
The AD 1000 PRO OS with a two-way Ethernet data link.
PRO OS with Ethernet data link
515 cfm unrestricted · 4.92 in · 115 V
From $7,107.90
2 options
Donaldson list $7,482.00
Heavy-duty laser applications. iQ display and filter monitoring.
Heavy-duty laser · iQ display
735 cfm · 4.92 in inlet · 230 V
Needs a 230 V single-phase supply. Check your site power.
Needs 230 V single-phase power
From $11,270.80
3 options
Donaldson list $11,864.00
Quote only
For the most demanding laser applications.
Most demanding laser uses
1,470 cfm · 4.9 in inlet · 208 V 3-phase
Power: 208 V, 3-phase, 60 Hz. Sold by quote.
208 V 3-phase · sold by quote
$17,660.50
Donaldson list $18,590.00
Filters and sensors for lasering PVCFilters and sensors for PVC
Built for lasering PVC: HCl and VOC sensors, acid-resistant coatings.
For lasering PVC · HCl sensor
206 cfm · 2.9 in inlet · 115 V
$7,144.00
Donaldson list $7,520.00
Companion equipment, not a fume extractorCompanion equipment, not a fume extractor
Cooling unit
Supplies filtered cooling air to a laser. Not a fume extractor.
Cooling air for a laser · not an extractor
206 cfm cooling air · 115 V
$2,112.80
Donaldson list $2,224.00
Figures as printed on each Donaldson US datasheet. Power is the configuration sold here. For filters and controls, tick Compare on up to three.
| Model | Airflow cfm | Pressure mbar | Inlet | Power as sold | Datasheet use | Web price |
|---|---|---|---|---|---|---|
| Compact | ||||||
| AD Access | 106 | 30 | 2.0 in · 50 mm | 115 V | Light-duty laser applications | From $1,630.20 |
| AD Nano+ | Specs not verified yet. See the AD Nano+ spec sheet. | $4,476.40 | ||||
| AD 350 | 206 | 96 | 3.9 in · 100 mm | 115 V | Light-duty laser applications | From $2,537.45 |
| Oracle family | ||||||
| AD Oracle iQ | 241unrestricted | 95 | 2.9 in · 75 mm | 115 V | A range of laser applications | From $4,126.80 |
| AD Oracle SA iQ | 223 | 96 | 2.9 in · 75 mm | 115 V | Lighter-use laser applications | From $3,343.05 |
| AD Oracle PRO OS and Connect | 241unrestricted | 96 | 2.95 in · 75 mm | 115 V | A range of laser applications | From $3,866.50 |
| AD Base 1 Oracle | 224 | 96 | 2.9 in · 75 mm | 115 V | Ride-on system for laser engraving | $3,563.45 |
| AD Base 2 Oracle | 223 | 96 | 2.9 in · 75 mm | 115 V | Ride-on system for laser engraving, with a large platform | $4,394.70 |
| High airflow | ||||||
| AD 500 iQ | 324 | 100 | 4.92 in · 125 mm | 115 V | Medium-duty laser applications | $6,610.10 |
| AD 1000 iQ | 515unrestricted | 65at 115 V | 4.92 in · 125 mm | 115 V | Medium to heavy-duty laser applications | $7,884.05 |
| AD 1000 PRO OS | 515unrestricted | 65at 115 V | 4.92 in · 125 mm | 115 V | Medium to heavy-duty laser applications | From $6,859.00 |
| AD 1000 PRO OS and Connect | 515unrestricted | 65at 115 V | 4.92 in · 125 mm | 115 V | Medium to heavy-duty laser applications | From $7,107.90 |
| AD 1500 iQ | 735 | 100 | 4.92 in · 125 mm | 230 Vsingle-phase | Heavy-duty laser applications | From $11,270.80 |
| AD 2000 iQ | 1,470 | 96 | 4.9 in · 125 mm | 208 V3-phase, 60 Hz | The most demanding laser applications | $17,660.50 |
| PVC processing | ||||||
| AD PVC iQ | 206 | 96 | 2.9 in · 75 mm | 115 V | Filtering fumes from lasering PVC | $7,144.00 |
Unrestricted is the datasheet figure with clean filters and no hose kit, at 230 V (AD Oracle iQ, AD Oracle PRO OS and Connect, AD 1000 iQ, AD 1000 PRO OS and AD 1000 PRO OS and Connect). The other datasheets don't state their test conditions, so compare airflow with care and check your machine's requirement.The AD 350 CU Filtered Cooling Unit isn't a fume extractor, so it isn't in this table.
| Model | Airflow cfm | Inlet | Power |
|---|---|---|---|
| Compact | |||
| AD Access | 106 | 2.0 in50 mm | 115 V |
| AD Nano+ | Specs not verified yet. See the AD Nano+ spec sheet. | ||
| AD 350 | 206 | 3.9 in100 mm | 115 V |
| Oracle family | |||
| AD Oracle iQ | 241unrestricted | 2.9 in75 mm | 115 V |
| AD Oracle SA iQ | 223 | 2.9 in75 mm | 115 V |
| AD Oracle PRO OS and Connect | 241unrestricted | 2.95 in75 mm | 115 V |
| AD Base 1 Oracle | 224 | 2.9 in75 mm | 115 V |
| AD Base 2 Oracle | 223 | 2.9 in75 mm | 115 V |
| High airflow | |||
| AD 500 iQ | 324 | 4.92 in125 mm | 115 V |
| AD 1000 iQ | 515unrestricted | 4.92 in125 mm | 115 V |
| AD 1000 PRO OS | 515unrestricted | 4.92 in125 mm | 115 V |
| AD 1000 PRO OS and Connect | 515unrestricted | 4.92 in125 mm | 115 V |
| AD 1500 iQ | 735 | 4.92 in125 mm | 230 Vsingle-phase |
| AD 2000 iQ | 1,470 | 4.9 in125 mm | 208 V3-phase, 60 Hz |
| PVC processing | |||
| AD PVC iQ | 206 | 2.9 in75 mm | 115 V |
Electronics and soldering · 4
Bench and tip extraction for soldering, and a mobile unit with an arm and hood. The TCU controls temperature for solder-paste printing.Bench and tip extraction for soldering, and a mobile unit with an arm and hood.
Not sure? Get extraction adviceBench, tip and mobile extractionBench, tip and mobile extraction
Dual-arm extraction for soldering. Install kit included.
Dual-arm soldering · install kit
106 cfm · 2 × 2.0 in inlets · 115 V
$1,155.20
Donaldson list $1,216.00
Tip extraction for hand soldering, up to 15 operators.
Tip extraction · up to 15 operators
22 l/min per tip · 2.0 in inlet · 115 V
$3,197.70
Donaldson list $3,366.00
Mobile dust and fume extraction, with an arm and hood.
Mobile · arm and hood
223 cfm · 75 or 100 mm arm · 115 V
From $3,636.60
2 options
Donaldson list $3,828.00
Companion equipment, not a fume extractorCompanion equipment, not a fume extractor
Temperature control
Keeps the solder-paste printing area at a set temperature.
Temperature control · not an extractor
2000 W cooling · 66–86 °F · 230 V
Not a fume extractor. Needs a 230 V supply.
Needs a 230 V supply
$11,052.30
Donaldson list $11,634.00
3D printing and additive · 6
Extractors designed for 3D printers, from a single benchtop unit to an enclosure package.Extractors designed for 3D printers, from a single benchtop unit to an enclosure package.
Not sure? Get extraction adviceCompact system for 3D printers. Unit only, no hose kit.
Compact · unit only, no hose kit
27 cfm · 2.0 in inlet · 115 V
$801.80
Donaldson list $844.00
Hose kit included
Adds a bench hose kit: stay-put arm, funnel, hose and table bracket.
Adds stay-put arm, funnel and hose
27 cfm · 2.0 in inlet · 115 V
$1,029.80
Donaldson list $1,084.00
For 3D printers, with digital speed control and return airflow.
Speed control · return airflow
70 cfm · 2.0 in inlet · 115 V
$1,383.20
Donaldson list $1,456.00
Package
Enclosure for open-frame printers, packaged with a 3D PrintPRO 3.
Enclosure + 3D PrintPRO 3
Enclosure 36.2 × 24.2 × 24.7 in · 115 V
$2,109.95
Donaldson list $2,221.00
For 3D-printing emissions, with adjustable airflow.
Adjustable airflow
30–159 cfm · 75 mm inlet · 115 V
$3,910.20
Donaldson list $4,116.00
Also in Printing
Compact system for printing applications, with three inlet sizes.
Printing · three inlet sizes
223 cfm · 3 inlet sizes · 115 V
$3,441.85
Donaldson list $3,623.00
Dust and powders · 4
DustPRO extractors for dust and particulate, from single-inlet units to high-volume systems.DustPRO extractors for dust and particulate, from single-inlet units to high-volume systems.
Not sure? Get extraction adviceDust and particulate extraction, single inlet.
Dust · single inlet
105 cfm · 2.95 in inlet · 115 V
$1,064.00
Donaldson list $1,120.00
Dust and particulate extraction, with simple operation.
Dust · simple operation
167 cfm · 2.0 in inlet · 115 V
$2,920.30
Donaldson list $3,074.00
Dust and particulate extraction, two inlets.
Dust · two inlets
235 cfm · 2 × 2.95 in inlets · 115 V
$2,940.25
Donaldson list $3,095.00
Medium to heavy-duty industrial dust. iQ display.
Heavy-duty dust · iQ display
520 cfm unrestricted · 4.92 in · 230 V
Needs a 230 V supply. Check your site power.
Needs a 230 V supply
$8,701.05
Donaldson list $9,159.00
Printing · 2
Solvent and UV vapor extraction for printing, and temperature control for solder-paste printing. Both are also listed above.Solvent and UV vapor extraction for printing, and temperature control for solder-paste printing. Both are also listed above.
Not sure? Get extraction adviceAlso in 3D printing
Compact system for printing applications, with three inlet sizes.
Printing · three inlet sizes
223 cfm · 3 inlet sizes · 115 V
$3,441.85
Donaldson list $3,623.00
Temperature control
Keeps the solder-paste printing area at a set temperature.
Temperature control · not an extractor
2000 W cooling · 66–86 °F · 230 V
Not a fume extractor. Needs a 230 V supply.
Needs a 230 V supply
$11,052.30
Donaldson list $11,634.00
Already own an extractor? Find replacement filters by model
Extraction advice
Answer a few quick questions and we'll recommend a system and the accessories to go with it. "Not sure" is a fine answer.
On the next page you'll check your answers, add anything else and leave your contact details.
Buying a Universal laser too? Quote the laser and extractor together
Know the model you want? Request a BOFA quote
0 of 3
